Apple Chemie Products

http://www.applechemie.com/
                                      GROUT 
ØAC-GROUT-H1 (Non-Shrink high strength grout)   
•As Per ASTM C-469/ASTM-C-940/ ASTM C-1107
•It is free from shrinkage.
•It has good pourability & flowability, therefore, does not corrode
        reinforcement & anchorage bolts.
•Protects deterioration of reinforcement due to corrosive effect.
•Has very high bonding strength.
•Application:
§Grout for filling below base plates of all structural steelwork.
§Foundation grout, also in concrete in micro concrete repairs & for flooring repairs.
§Grouting of main equipment in power plant area.
ØAC-FIX-FAST
•Confirms to ASTM C-266 and ASTM C-109
•It is very useful for quick, reliable &
       efficient sealing.
•It withstands water pressure efficiently.
•Economical Seal.

•Application: For locking of ends of post tensioned cables, water tanks.

ØAC-CABLE-GROUT (Pre-packed, Non-shrink Cementations Grout )
•As per ASTM C-827-01A
•Makes Grout impermeable
•Very strong and durable
•It does not contain chlorides/nitrates/sulphides
•Compatible with OPC and PPC.
•Applications:
§Used for grouting of PSC girders.
§Road and bridge projects, Metros and tunnels.
http://www.applechemie.com/
ØAC-DUR-SELFLEVEL
•Epoxy Grout self-level to make pad below bearing of bridges girders
•Leaving course for bridge repair or area below bearing pad.
•Applications: Road and bridge projects.
ØAC-CEMENT-CAPSULE
•Designed for the anchoring of dowels and
         rebars in concrete.
•No toxic emanation or fumes
•Environmental friendly
•No Calcium Chlorides
•No product mixing on site
•No special tools and equipment required
• •High early strengths
•Thixotropic mix
•Applications: Road and bridge projects.
ØAC-RAIL-GROUT (Fast Setting, High Strength, Multipurpose, Nonshrink Cementitious Grout)
http://www.applechemie.com/
•High initial and final strength
•Good pourability and workability
•Bears high static and dynamic forces
•Protects deterioration of reinforcement due to corrosion
•It has excellent weather ability.
•Applications: tunnels and metros.
•
ØAC-LOK-FIX (Anchor grout for bars & bolts)
•Ultra-high strength in a short time.
•Corrosion resistant.
•It can be used in damp conditions.

•Applications:
•Special product for anchor grouting.
Application:
§Specially recommended for anchor grouting.
                                            CURING PRODUCTS
ØAC-CURE-R (Resin based)
ØConfirms to BS 7542, ASTM C-309, ASTM C-156.
•Economical comparing to conventional methods.
•Exhibits good solar reflection properties and allows reduction in the concrete temperature.
•Suitable for places facing water shortage.
•Water reduction up to 20%
•Applications: Recommended for PQC concrete road projects.
ØAC-CURE-S(W) (Water-based)
•Negligible change in compressive and flexural strength.
•Confirms to BS 7542, ASTM C-309, ASTM C-156.
•Economical compared o conventional curing method.
•Ideal for curing normally inaccessible and overhead places.
•It can receive paint, tiles or plaster on it.
•Applications:
§Various irrigation projects
§In avoiding water curing after the casting of transmission tower foundation
§Road works.
ØAC-CURE-R(MS) (resin based aluminized reflective solvent based curing agent)
•Most suitable for PQC works.
•Exhibits good solar reflection properties.
•Minimizes shrinkage cracks as curing process starts immediately after casting.
•Leads better quality controls at work site.
•Application: Recommended for road projects.
ØAC-CURE-R(M)(Resin based curing aluminized reflective
        curing compound)
•Easy to apply and can be sprayed.
•Best for place having a water shortage.
•Does not react chemically with cement.
•Exhibits good solar reflection properties and allows reduction in the concrete
        temperatures.
•Application: Road works.
•
ØAC-CURE-S
•As per ASTM C-309/ C-156, BS:7542 .
•Water reduction up to 15%
•Best for places having water shortage.
•Can be used at places having high temperature.
•Application: kerbs on roads, lining in irrigation and other concrete structures.

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more