Expansion Joints and sealants

http://www.applechemie.com/

AC-POLYSEALRecommended for sealing gaps in most civil engineering works like building 
structure,subways,basements,floors,between pipelines and RCC supports ,expansion joints construction joints,etc Conforms to IS 12118 (part 1 & 2) – 1987 , BS 4254 – 1983, BS 5212 – 1990


http://www.applechemie.com/
  • Easy to use
  • Economical
  • Excellent adhesion with many materials
  • Non- sag in vertical and overhead joints
  • Good chemical resistance
  • Permanently elastic
(B) Concrete road joints in the plant area are sealed with polysulphide sealant are an economical option like Bituminous Sealant 
Bituminous Sealant: AC-DUR-BS
AC-DUR-BS
  • AC-DUR-BS is bituminous, cold applied to the sealing compound. Product conforms to IS 1580. The product is
    recommended for application to various joints in plant flooring, plant roads, and other areas
  • Bit uminous flexibles,joint sealing material for canal lining and PQC roads.
  • Also recommended for various joint in power plant structures.
 AC-DUR-CT (S)
 Underground protection for the Industrial structure is subjected to mechanical chemical and environment abuse. The underground part of the structure can be damaged due to an attack of various liquid and solids which can accumulate around the footing after the plant is constructed and hence it is necessary to protect the entire underground structure.http://www.applechemie.com/
  • Coal Tar Epoxy formulation AC-DUR-CT(S) is largely accepted product for all types of protective coatings in
    plant areas and other infrastructure works. It is especially recommended for underground protection
    and ETP. It can be used for concrete structure or structural site
  • Excellent waterproofing & chemical resistance
  • Excellent gloss, durability, adhesion
  • Excellent protection to concrete & steel
http://www.applechemie.com/

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more