Foundation Grout & Floor Repair:

http://www.applechemie.com/
The product is recommended for all types of foundation grouting, (Non shrink high strength free flow grout) is best recommended.
AC-GROUT-H1 
Premixed, nonshrink, free flow, high strength grout & micro concrete
Per ASTM C-469 / ASTM-C-940/
ASTM C-1107
http://www.applechemie.com/

  • It is free from shrinkage.
  • AC-GROUT-H1 has good pourability & flowability
  • It does not corrode reinforcement & anchor bolts.
  • Has very high bonding strength.
  • High initial & final strengths.
  • Bears reasonable static & dynamic forces.
  • Controlled expansion ensures positive surface contact
  • Grouting of main equipment in power plant area

Floor Repair:

For maintenance and repair of the damaged floors, AC-GROUT-H1 is an excellent product. It has advantages like
  • Quick Repair
  • High Early Strength
  • An area can be use used within 12 hrs after repair. It is recommended to use curing compound AC-CURE-W(S)
    for repaired concrete patches.
    http://www.applechemie.com/

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more

Parts of a Rock Drill

  Regardless of the industry, all types of rock drills have a standard design that is essentially a combination of replaceable attachments. The most significant parts of a standard rock drill include the following: ·          Drill bit : This is the tip of the rock drill that first makes contact with the ground during a boring operation. ·          Drill stem : This is the long frame that penetrates the ground during boring whose end houses the drill bit. ·          Drill rod : This is the hollow part of the drill stem that connects the motor of the rig to the drill bit. The drill rod is also responsible for transferring the cutting force to the drill bit to enable the rock drill to penetrate into the ground. ·          Carbide bits : These are special types of drill bits used in rotary and percussive drilling ...
Read more