Green Building Products

http://www.applechemie.com/


GREEN BUILDING PRODUCTS
“GO GREEN GO CLEAN” 

•       We are committed to protect environment & we are a part of the global mission called "GREEN WORLD" and also providing innovative construction chemicals for Green Building.
•       We are also the part of IGBC (Indian Green Building Council)
•       Green building products: Green building products are composed of renewable resources and are environmentally responsible because impacts are considered over the life of the product.
•       Overall material/product selection criteria:
§  Resource efficiency
§  Indoor air quality
§  Energy efficiency
§  Water conservation
§  Affordability
•       Our green building products meets the above maximum selection criteria as enumerated below:
§  Environmentally friendly and sustainable construction chemicals are designed.
§  Products are non-toxic and organic.
§  During the process, air Pollution is minimum, waste reduction, Embodied Energy Reduction (EER), VOC Reduction and similar green building parameters are adhered to.
•       There are many of our green building products which could also be used in the development of smart city across India. They are helpful in:
§  Water conservation
§  Cement requirement
§  Efficient repair of old and new structures.
§  In increasing durability of structure
§  Energy, time and cost saving
§  Better LCA (Life Cycle Assessment)



APPLE CHEMIE GREEN BUILDING PRODUCTS RANGE

PRODUCTS
PROPERTIES
AC-MENT-BV-430
(Admixture)
AC-CURE-R
(Resin Based Curing Compound)
AC-CURE-S
(Wax Based Curing Compound)
AC-CURE-RM
(Resin based curing aluminised reflective curing compound)
AC-SPREAYSET-163
(Alkali free set accelerator for wet-mix sprayed concrete)
AC-POLYSEAL
(Elastomeric two-partPolysulphidecompund)
AC-DUR-CT(S)
(Solvant less coal tar epoxy formulation)
AC-FLEX-CL
(Protective & crack bridging coating system)
AC-PQC-INJECTO
(Low viscous epoxy injection resins)
AC-DUR-SBA-G
(A Segment Bonding Agent for Bridge Construction)
  • Environmental friendly, sustainable construction chemical is designed. Products are non-toxic, organic and during the process, air Pollution (P2) is minimum, waste reduction (WR), Embodied Energy Reduction (EER), VOC Reduction and similar green building parameters are adhered to.

Standard Range of Products

AdmixtureSuper PlasticizersAir Entraining AgentsAccelerators
Waterproofing CompoundsGroutsCuring CompoundsSealants
ExposesPolymersRepair ProductsIndustrial Flooring
  • "We produce more than 200 Products"
Roads & BridgesIrrigationHousing & TownshipIndustries
Tunnel & MetrosAirport & RailwaysDock & HarboursInfrastructure Development

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more

Parts of a Rock Drill

  Regardless of the industry, all types of rock drills have a standard design that is essentially a combination of replaceable attachments. The most significant parts of a standard rock drill include the following: ·          Drill bit : This is the tip of the rock drill that first makes contact with the ground during a boring operation. ·          Drill stem : This is the long frame that penetrates the ground during boring whose end houses the drill bit. ·          Drill rod : This is the hollow part of the drill stem that connects the motor of the rig to the drill bit. The drill rod is also responsible for transferring the cutting force to the drill bit to enable the rock drill to penetrate into the ground. ·          Carbide bits : These are special types of drill bits used in rotary and percussive drilling ...
Read more