Industries

http://www.applechemie.com/

AppleChemie providing innovative construction chemicals for Industries. Black Cat Enterprises Pvt. Ltd. has two states of art plants for the manufacturing of construction chemicals. The total range covers more than 200 products. Apple Chemie Products normally used for Industries are elaborated for your convenience

Admixture

We offer a series of admixture with now generation plasticizers.
The Admixtures are recommended for:-AppleChemie providing innovative construction chemicals for Industries. Black Cat Enterprises Pvt. Ltd. has two states of art plants for the manufacturing of construction chemicals. The total range covers more than 200 products. Apple Chemie Products normally used for Industries are elaborated for your convenience

Admixture

We offer a series of admixture with now generation plasticizers.
The Admixtures are recommended for:-
  • Foundation & Structural Concreting up to(M 25 Grade Concrete)AC- PLAST-BV- M4 is one of the proved products.
  • For Underground structures, Basements, Tunnels, Ducts ( M30 to M45 Grade) where totally watertight
    construction is required AC-MENT-BV-430- E6, AC-MENT-BV430- AM6, AC-MENT-BV-430-A3 is recommended
    to maintain the water /cement ratio of 0.4 or less
  • For industrial flooring super plasticizer like AC-MENT-BV430-AM6, AC-MENT-BV-430-A3 is recommended
\\  



    Advantages of using a plasticizer
  • Is reduce W/C ratio
  • Is increase compressive strength of concrete
  • It reduces Shrinkage Cracks
  • It prevents corrosion of reinforcement
  • It improves the surface finish of the concrete
  • Help to produce sound & denser concrete

Protection of Steel in Aggressive soil conditions

In many industrial areas soil has got some sulfate & chloride or the moisture or water below ground contain some chemicals. These chemicals have an aggressive attack on concrete & this leads to rusting of steel reinforcement inside. Black Cat Enterprises Pvt Ltd has got an innovative solution like A C-CORRO DUR which when added to concrete, protects the rebar within. Passive film on the reinforces meant protects it from rusting
Supplementary additive for control of reinforcement corrosion

  • AC- Corridor densifies the concrete mass.
  • Reduces the rate of corrosion of steel.
  • Economical compared to costly concrete repairs & epoxy coatings.
  • Prevents the corrosion & actively shields the exposed concrete faces from chloride ion penetration.
  • Enhances strength & durability of concrete

AC-Mould-Kote

A water-based economical mold release agent
  • Increases the life of formwork.
  • Leaves no stains on concrete after demoulding.
  • Allows easy demoulding of forms.
  • Allows efficient adhesion of forthcoming plasters, mortars & paints.
  • No dirt sticks on a surface after its drying.
  • Coated shuttering surface remains clean & free from remnants of concrete & cement splashes after demoulding.

Industrial Flooring

For Industrial Flooring, Non-metallic floor hardener is most recommended. Depending upon the type of traffic consumption of floor hardener is to be selected

AC-HARDTOP:
Non-metallic Abrasion resistant topping for flooring
  • Provides high wear & abrasion resistant surface.
  • Resistant to oil & water penetration.
  • Provides nonrusting & maintenance free surface.
  • Useful for areas exposed to environment & continuous wetness.
  • Noncombustible, easy to clean
  • Economical compared to other flooring systems.
  • Does not charge electrostatically.
  • The product can be used during VDF (Vacuum Dewatered Flooring) does not add to floor thickness

Suggested consumptions of Hardtop for various type of flooring

No.Area of UseFloor TypeApproximate consumption Kg/Sqm
1Automobiles traffic,pedestrian traffic, sliding & rolling of light goods,wear & tear of floor due to movement of light duty vehicle traffic.Light2 to 3
2Abrasion & traffic with medium duty vehicles heavy pedestrian traffic, sliding, grinding, medium industrial flooring etc.Medium3 to 4
3Impact & abrasion of critical nature, hard Wheel traffic, heavy industrial flooring etc.Heavy

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more