Irrigation Sector


http://www.applechemie.com/

AppleChemie providing innovative construction chemicals for Irrigation Projects. Apple Chemie India Pvt. Ltd. has two states of art plants for the manufacturing of construction chemicals. The total range covers more than 150 products. Apple Chemie Products normally used for Irrigation Projects are elaborated below for your convenience.

Good Concrete

For good workability and to make impervious concrete, water reducing admixture(WRA) and plasticizer as per IS 9103 and IS 2645 are recommended
The product adopted are:



  • AC-PLAST-BV-M4

    • AC-PLAST-BV-M4 -2M

    Protection of steel structure & gates

    Most recommended product by the irrigation department
    • AC-DUR-CRE
    • AC-DUR-CR(S)
    • AC-DUR-CT (Coal Tar Epoxy) It is a specially designed excellent protection coating
      It is an economical option
    • Excellent gloss ,durability,adhesion.
    • Excellent protection to concrete &steel
    • AC-DUR-CRE It is long-range high-performance protection coating

    Self Compacting Concrete

    For secondary concreting work, it has been used at many projects
    Apple Chemie provide admixture/additives required for SCC
    • AC-VISCOFLUX-O2(Hyper plasticizer on Multicarboxylate Ether MCE)
    • AC-GEL-FILL (Densified micro Silica)

    Canal Lining work:

    Air Entraining Plasticizing additive Canal Lining is mostly done with paver, slop concrete mechanism . for easy placement and good workability of concrete ‘air entraining admixture’ (AC-PLAST-AEA-C) is recommended. The product conforms to IS 9103. The product incorporates million of microbubbles which act as flexible ball bearing & modifies the properties of plastic concrete. After the concrete is placed it becomes impermeable. It is especially recommended products for canal lining work.



                                                                                http://www.applechemie.com/

    Curing Compound Product




    • Curing Compound AC-CURE-S when sprayed on fresh concrete forms a continuous films
      and cover the concrete and prevents evaporation of water from it.
    • The water added during the concrete mixing is sufficient for the complete hydration of
      cement and development of full strength of concrete
    • AC-CURE-S can prevent drying shrinkages cracks. The product conforms to BS: 7542 ASTM-C-309

    Cut and Cover work at Gosikhurd Project Use of Super Plasticizer AC-PLAST-BV-M4-2M

    Gosikhurd Project Aqueduct on Right Bank Canal Use of Apple Chemie Plasticizer AC-PLAST-BV-M4-2M
    The inside portion of Aqueduct is coated with AQUAGUARD-FLEX Flexible and wear resistant waterproofing coating.



    Expansion and Movement Joints Filler

    Steel protection Coating AC-DUR-ZRP/ AC-DUR-CRE/ AC-WALL COAT-1000 – High range protection coating for steel
    AC-JOINT SEAL is a special Sealant for canal Lining Joints. It allows reasonable flexibility while keeping the joint watertight


















    Comments

    Post a Comment

    Popular posts from this blog

    Concrete Curing Compound

    Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
    Read more

    Materials are used for road construction

    Image
    Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
    Read more

    DESIGN PROCEDURES FOR A BUILDING FOUNDATION

    Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
    Read more