Power Sector Concrete Super Plasticizer

http://www.applechemie.com/


AppleChemie providing innovative construction chemicals for Power Projects. Black Cat Enterprises Pvt. Ltd. has two states of art plants for the manufacturing of construction chemicals. The total range covers more than 200 products. Apple Chemie is a brand of Black Cat Enterprises Pvt. Ltd. Apple Chemie Products normally used for Power Projects are elaborated below for your convenience.

Concrete Super Plasticizer

AC-PLAST-BV-M4 - is advantageous as:-
  • It reduces W/C ratio
  • It increases the compressive strength of concrete
  • It reduces Shrinkage Cracks
  • It prevents corrosion of reinforcement
  • It improves the surface finish of the concrete
http://www.applechemie.com/

AC-MENT-BV-430-AM6

  • Apple Chemie Super Plasticizers are as per IS 9103 &
    ASTM C รข€“ 494 with additional benefits to the user. It makes dense and durable concrete.
  • Turbine Generator foundation and TG concrete are best done with these admixtures.

AC-GREEN-SLUMP G-01

  • Apple Chemie extends the services of Mix Design for Chimney Concrete.
  • AC-Green-Slump G-01 can give higher slump retention and facilitate slip formwork

Super Plasticizer for other Foundation Works

Apple Chemie plasticizers are recommended for Piling, Boiler foundation, T.G. foundation, Power House foundation, all equipment foundation for BTG Area.

  • CCW & ACW pumps foundation
  • ESP Foundation
  • Mill foundation
  • Bunker Foundation
  • Bunker Hopper
  • Fuel gas duct support foundation
  • Cable rack / Pipe rack
Superplasticizers are very necessary for concreting of following areas:
  • Cable trenches & pipe trenches
  • Raw water storages reservoir
  • WTP section
  • Portable water tanks
  • Cooling tower cold water basin
  • Effluent treatment plant
  • Admin Building/Quarters/PQC Work in Plant area
  •  http://www.applechemie.com/.

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more