Roads & Bridges

http://www.applechemie.com/
AppleChemie providing innovative construction chemicals for Road Projects. Apple Chemie India Pvt. Ltd. has two states of art plants for the manufacturing of construction chemicals. The total range covers more than 150 products. Apple Chemie Products most recommended for Road Projects are elaborated below for your convenience

AC-PLAST-AEA-C


 High-performance air-entraining and plasticizing admixture for road Curbs As per ASTM C-260\


  • Excellent finish and size retention of the curb.
  • Reduced permeability & increased water tightness.
  • Reduced segregation and bleeding.
  • Improved plasticity and workability.
  • Increased resistance to scaling.
  • Greatly improved the stability of air entrainment
http://www.applechemie.com/

AC MOULD KOTE

Mold release agents (Water Based) for removal of shuttering              
  • Increases the life of formwork.
  • Leaves no stains on concrete after demoulding.
  • Allows easy demoulding of forms.
  • Allows efficient adhesion of forthcoming plasters, mortars & paints.
  • No dirt sticks on a surface after its drying.
  • Coated shuttering surface remains clean & free from remnants of concrete
  • Cement splashes after demoulding.
  • The bonding strength of concrete remains unaffected.                                                             

AC-MENT-BV-430-AM6

Super Plasticizer for all types of concrete works The Product Confirms IS-9103-1999. It gives:
  • Excellent pumpability, easy placement, and better finish.
  • Higher strength without an increase in cement content.
  • Improved cohesion and less risk of shrinkage cracks.
  • Higher durability & higher impermeability
  • No risk of reinforcement corrosion as the product is chloride free.
  • No side effects on concrete or steel.http://www.applechemie.com/

AC-DUR-SBA(G)

Segment bonding adhesive for joining of bridge segments. As per FIP/ASTM/BS
  • Meets the International & National standards (FIP, BS, ASTM etc.)
  • It has the high initial strength and ultimate strength.
  • High scratch hardness, excellent adhesion & high abrasion resistance.
  • Excellent acid, alkali, salt and detergent resistance.
  • Most recommended for segmental construction of bridge and flyover
http://www.applechemie.com/

AC-CABLE-GROUT

Pre-packed, Non-shrink Cementations Grout Admixture for Post Tensioned Cable As per ASTM C-827-01A,  BIS 8110 PART 1 1985 and MORTH Appendix Sec 1800/III Gaseous positive expansion of the Grout compensates for the Shrinkage and settlement in a plastic paste of cement.

  • Makes Grout impermeable
  • Very strong and durable
  • It does not contain chlorides/nitrates/ sulfides
  • Compatible with OPC













Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more