APPLE CHEMIE AT PUNE



APPLE CHEMIE AT PUNE

       


With pan INDIA access we are also focusing in western region of India like Nashik, Pune, Mumbai through our office Apple Chemie at baner road, Pune (M.S) India. Pune is a sprawling city in the western Indian state of Maharashtra, also known as the cultural capital of Maharashtra. Since the 1950s Pune has had a traditional economic base as most of the old industries continue to grow. The city is known for its manufacturing and automobile industries.
From our branch office in Pune we are trying more emphasis towards our specific targets in Infrastructure: roads, bridges, mass transit system, Pune metro, MMRDA projects and more to add on. We also have our dedicated team of technical and commercial, who are consistently working and equipped with futuristic technologies to meet the demands of projects and clients.
We are constantly and consistently working from the past 25 years. Carrying on this experience with us there are numerous large scale and small scale projects we have completed with complete satisfaction from our clients. Striving ahead successfully with our motto “Engineering your dreams with us”


Apple Chemie has worked with the most reputed names in the construction industry:







http://www.applechemie.com/





Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more