OUR SUCCESSFUL PARTICIPATION-HOUSING AND REAL ESTATE



OUR SUCCESSFUL PARTICIPATION-HOUSING AND REAL ESTATE













http://www.applechemie.com/





Comments

Post a Comment

Popular posts from this blog

MARKET FORMS OF STEEL

Following are the standard shapes in which the rolled steel sections are available in the market- 1. Angle sections- The Angle section may be equal legs or unequal legs. The equal angle sections are available in sizes varying from 20 mm x 20 mm x 3 mm to 200 mm x 200 mm x 25 mm. The corresponding weight per meter length are respectively 9 N and 736 N. The unequal angle sections are available in sizes varying from 30 mm x 20 mm x 3 mm to 200 mm x 150 mm x 18 mm. The corresponding weight per meter length are respectively 11 N and 469 N. The angle section extensively used in the structural steel work especially in the construction of steel roof trusses and filler joist floors. 2. Channel Section- The channel section consist of a web with two equal flanges. A channel section is designated by the height of web and width of flange. These sections are available in sizes varying from 100 mm x 45 mm to 400 mm x 100 mm. The corresponding weights per metre length are respectively 5...
Read more

The different types of road construction materials

The natural earth track cannot withstand modern heavy traffic loads very satisfactorily because it lacks in strength and good riding surface. It is therefore, important to construct some structure in the form of pavements on the top of natural surface to enable it to support wheel load safety and to provide a good riding surface for a longer period. So properly constructed and maintained roads reduce the wear and tear of vehicles and also increase the speed of transportation. Therefore the construction of roads should be done properly according to the specification. 1. Construction of Earth Roads First of all sub-grade is prepared all the road surface is brought to the required camber and gradient. ·          Then the surface is rolled properly and well wetted with water. ·          Then a layer of about 10 cm thickness of graded soil is spread evenly. ·      ...
Read more

Types of Epoxy Floor Coatings

Image
Epoxy floors and epoxy coatings are becoming increasingly popular for use as commercial and industrial flooring. There are a number of different types of epoxy coatings that can be used on floors including self-leveling epoxy coatings, self-dispersing epoxy coatings, mortar epoxy coatings, graveled epoxy coatings, epoxy terrazzo coatings, epoxy antistatic coatings, and vapor barrier epoxy coatings. Each of these types of epoxy coatings offers distinct advantages and disadvantages when compared to the others. Epoxy Coating Choices for Flooring: Self-Dispersing Epoxy Coatings for Floors: This type of epoxy coating is commonly used in areas that receive frequent forklift or heavy truck traffic as it has very good mechanical strength. Another type of this durable epoxy coating is self-dispersing epoxy with quartz sand. This type of epoxy coating is commonly used in food processing industries or other locations where liquids are present because it has good anti-slip characteris...
Read more