Resin Based Curing Compound




Resin based curing compound on a low viscosity Resin emulsion. It is supplied as a white emulsion which forms a white film on drying. When first applied to a fresh cementitious surface the Emulsion breaks to form a continuous, non-penetrating white coating. This dries to form a continuous white film which provides a barrier to moisture loss, ensuring more Efficient cement hydration, improved durability and reduced shrinkage.

USES

As a spray/brush applied membrane to retain moisture in concrete for effective curing. Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridgework


ADVANTAGES
·         Improved curing of concrete enhances cement hydration and provides a more durable concrete.
·         Control of moisture loss improves surface quality, reducing permeability, producing a hard wearing, dust free surface.
·         Reduces surface cracking and shrinkage by eliminating moisture loss.
·         Resin based, therefore, non-flammable, non toxic
·         Spray application reduces labour costs and eliminates the need for alternative curing systems
·         Rapid film formation
    

      http://www.applechemie.com/






Comments

Post a Comment

Popular posts from this blog

MARKET FORMS OF STEEL

Following are the standard shapes in which the rolled steel sections are available in the market- 1. Angle sections- The Angle section may be equal legs or unequal legs. The equal angle sections are available in sizes varying from 20 mm x 20 mm x 3 mm to 200 mm x 200 mm x 25 mm. The corresponding weight per meter length are respectively 9 N and 736 N. The unequal angle sections are available in sizes varying from 30 mm x 20 mm x 3 mm to 200 mm x 150 mm x 18 mm. The corresponding weight per meter length are respectively 11 N and 469 N. The angle section extensively used in the structural steel work especially in the construction of steel roof trusses and filler joist floors. 2. Channel Section- The channel section consist of a web with two equal flanges. A channel section is designated by the height of web and width of flange. These sections are available in sizes varying from 100 mm x 45 mm to 400 mm x 100 mm. The corresponding weights per metre length are respectively 5
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia of any particle shall not be greater than 2/3rd of the layer thickness of sub-base Typical particle size distribution for the sub-base (granular) which will the meet strength requirements are: 2.Sub-base Course: ·          It is layer of granular mat
Read more

GREEN BUILDING PRODUCTS

Image
GREEN BUILDING PRODUCTS “GO GREEN GO CLEAN” •       We are committed to protect environment & we are a part of the global mission called "GREEN WORLD" and also providing innovative construction chemicals for Green Building. •       We are also the part of IGBC (Indian Green Building Council) •       Green building products: Green building products are composed of renewable resources and are environmentally responsible because impacts are considered over the life of the product. •       Overall material/product selection criteria: §   Resource efficiency §   Indoor air quality §   Energy efficiency §   Water conservation §   Affordability •       Our green building products meets the above maximum selection criteria as enumerated below: §   Environmentally friendly and sustainable construction chemicals are designed. §   Products are non-toxic and organic. §   During the process, air Pollution is minimum, waste reduction, Embodied Ener
Read more