White Water Proofer


PRODUCT DESCRIPTION

 WWP creates a tough and abrasion resistant film, seals hairline cracks, totally and acts as an effective barrier against moisture, water and atmospheric impurities. Further, it waterproofs all absorbent surfaces. Due to its white colour, it reflects heat and helps in reducing room temperature and keeps interiors cool.

ADVANTAGES

·         Single-component, ready-to-use, white colour.
·         Abrasion resistant, washable, scrub resistant.
·         Resistant to temperature upto 100° to 110° C, excellent reflection of sunlight, reduces room temperature.
·         High elongation, withstands expansion/ contraction without cracking, deforming, softening or peeling of films.
·         Excellent barrier to moisture, gas atmospheric impurities and chemical attacks on structure.
·         Prevents growth of fungus, mildew, algae, etc.
·         Excellent adhesion to almost all types of structures ad building materials.
·         No skilled labour required. Can be applied by brush or can be sprayed.
·         Durable and economical.

APPLICATIONS

·         Waterproofing of terrace, parapet walls, white water proofer ,outer and inner walls, basements, as an overcoat or undercoat on R.C.C. slabs.
·         Waterproofing of terraces having China mosaic surface or any glazed surface.
·         As an overcoat wherever Crackseal has been used.
·         Application on A.C. sheets, GI sheets, PUF insulated roofs reduces temperature and keeps interiors cool.
·         Ideally recommended for use on sloping roofs, inverted roofs, domes, steeples, bio gas plants, shell roofs etc.

PREPARATION

·         Remove all existing treatment, if any.
·         Clean the surface free of oils, grease, dust, loose particles etc.
·         Clean the cracks and joints of dust, loose particles etc.
·         Apply one coat of Clear Water proofer on the surface. Allow to dry for 6 to 8 hours.
·         Fill the visible cracks with Crack seal Compound by means of putty knife, spatula or fingers. Avoid formation of cavities, bubbles at the time of filling.
·         Allow to dry for at least 24 hours. Observe the filling area after lapse of the said time, and if necessary re-fill the cracks to the level of the surface.

METHOD OF APPLICATION

·         Stir the contents thoroughly.
·         Apply one coat of White Water Proofer on prepared surface. Allow to dry for 8 hours.
·         Apply second coat as above. Every subsequent coat, if applied, should be at an interval of 8 hours between each coat.
·         Available in Grey, Red and Teracotta colours.

CLEANING OF TOOLS

Wash all containers, brushes, tools and hands with mineral turpentine only.

PRECAUTIONS

·         The surface to be treated should be clean, dry and moisture free. Cannot be applied on damp surfaces.
·         Working areas should be well ventilated, as the fumes of the evaporation of solvent should not be inhaled. Smoking should not be permitted during application.
·         Do not apply on fresh concrete. Can be applied after 28 days of curing of concrete only.
     
      http://www.applechemie.com

Comments

Post a Comment

Popular posts from this blog

Concrete Curing Compound

Curing is essential for the hydration of cement in concrete making. So, to maintain required moisture content, come precautions are applied. Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete. Types of Concrete Curing Compounds ·          Synthetic Resin Concrete Curing Compound Synthetic resins will seal the concrete by forming membrane. If we want to provide plastering, the membrane can be removed by washing it with hot water. ·          Acrylic Concrete Curing Compound Acrylic is made of polymers of acrylic acid. It also seals the concrete in good manner. It is having property of adhesion to the subsequent plaster. No need to wash the surface of acrylic with hot water if we want to provide plastering. ·      ...
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia...
Read more

DESIGN PROCEDURES FOR A BUILDING FOUNDATION

Good design must not only be safe but must aim to save construction costs, time and materials. The following procedures should help to achieve this and an ‘educated’ client will recognize the importance of funding this work with a realistic fee. 1. DECIDE THE LOCATION OF COLUMNS & FOUNDATION AND TYPE OF LOADS ACTING ON THEM On the building plan, the position of columns and load bearing walls should be marked, and any other induced loading's and bending moments. The loads should be classified into dead, imposed and wind loading's, giving the appropriate partial safety factors for these loads. 2. ESTIMATE ALLOWABLE BEARING PRESSURE OF SOIL USING GROUND INVESTIGATION REPORT From a study of the site ground investigation (if available), the strength of the soil at various depths or strata below foundation level should be studied, to determine the safe bearing capacity at various levels. These values – or presumed bearing values (from any standards or codes) in the...
Read more