GREEN BUILDING PRODUCTS




GREEN BUILDING PRODUCTS
“GO GREEN GO CLEAN”

•      We are committed to protect environment & we are a part of the global mission called "GREEN WORLD" and also providing innovative construction chemicals for Green Building.
•      We are also the part of IGBC (Indian Green Building Council)
•      Green building products: Green building products are composed of renewable resources and are environmentally responsible because impacts are considered over the life of the product.
•      Overall material/product selection criteria:
§  Resource efficiency
§  Indoor air quality
§  Energy efficiency
§  Water conservation
§  Affordability
•      Our green building products meets the above maximum selection criteria as enumerated below:
§  Environmentally friendly and sustainable construction chemicals are designed.
§  Products are non-toxic and organic.
§  During the process, air Pollution is minimum, waste reduction, Embodied Energy Reduction (EER), VOC Reduction and similar green building parameters are adhered to.
•      There are many of our green building products which could also be used in the development of smart city across India. They are helpful in:
§  Water conservation
§  Cement requirement
§  Efficient repair of old and new structures.
§  In increasing durability of structure
§  Energy, time and cost saving
§  Better LCA (Life Cycle Assessment)



PRODUCTS
ADVANTAGES AND SUSTAINABILITY
AC-COOL-COAT (Cool Roof coating)
Environment  friendly, Solar heat reflective and thermal insulating coating
AC-MOULD-KOTE (Mould release agent)
Efficient and effective mould release agent for all construction projects using mould as formwork
AC-CORROGUARD (Corrosion resistant)
Anti carbonation, corrosion resistant coating for rebar in construction
AC-CRYSTACRETE (Durability enhancer)
Self healing and durability enhancer of concrete
AC-POLYSEAL (Polysulphide sealant)
Easy to use and chemical resistive sealant for joining of expansion joints
AC-FLEX-CL (Protection coating)
Anti-carbonation and sustainable coating
AC-PQC-INJECTO (Non shrink compound)
Water thin, zero VOC, injectable resin
AC-DUR-SBA-G (Segment bonding adhesive)
Sustainable and environment friendly bonding adhesive for precast segments
ViscoFlux 2202(Advanced PCE Admixture)
Patented green building technology by ACIPL
Reduces W/C ratio, high retention, high density and strength
AC-CURE-R(Curing Compound)
Water conservation product for curing of concrete
AC-FOAM CONCRETE (Light weight concrete)
Thermal insulation and energy saving light weight concrete

 http://www.applechemie.com/


Comments

Post a Comment

Popular posts from this blog

MARKET FORMS OF STEEL

Following are the standard shapes in which the rolled steel sections are available in the market- 1. Angle sections- The Angle section may be equal legs or unequal legs. The equal angle sections are available in sizes varying from 20 mm x 20 mm x 3 mm to 200 mm x 200 mm x 25 mm. The corresponding weight per meter length are respectively 9 N and 736 N. The unequal angle sections are available in sizes varying from 30 mm x 20 mm x 3 mm to 200 mm x 150 mm x 18 mm. The corresponding weight per meter length are respectively 11 N and 469 N. The angle section extensively used in the structural steel work especially in the construction of steel roof trusses and filler joist floors. 2. Channel Section- The channel section consist of a web with two equal flanges. A channel section is designated by the height of web and width of flange. These sections are available in sizes varying from 100 mm x 45 mm to 400 mm x 100 mm. The corresponding weights per metre length are respectively 5
Read more

Materials are used for road construction

Image
Road consist of basically 4 layers: Sub-grade: The sub-grade material should be clean and free from organic matter and should be able to be compacted by roller, to form stable sub-base. The material should have the following characteristics: ·          Well graded, uniformity coefficient (D60/D10) should not be less than 3. ·          Fraction passing sieve #200 shall not be greater than 2/3rd of the fraction passing sieve #40. ·          Should have a L.L not greater than 25%. ·          P.I not greater than 6 ·          CBR should not be less than 25. ·          In coarse grain, aggregate retained by #10 sieve, %age of wear shall not be greater than 5%. ·          The maximum dia of any particle shall not be greater than 2/3rd of the layer thickness of sub-base Typical particle size distribution for the sub-base (granular) which will the meet strength requirements are: 2.Sub-base Course: ·          It is layer of granular mat
Read more